Metal Detectable Mounting Bases, 3/4″, Teal, No Adhesive
  • Metal content blended throughout mount
  • 2-3 times stronger signal strength compared to competition
  • US FDA food contact material compliance*
  • Prevent possible contamination resulting in costly recalls and liabilities
  • Used when detection of foreign objects in consumable products is critical
  • Seen in food processing, beverage, pharmaceutical, and cosmetic industries
Not Detected by X-Ray.
Disclaimer: The use of metal detectable products demonstrate that due diligence and precautionary measurements have been taken to prevent contaminants in your product.
The user of the metal detectable cable ties and mounts is liable to adjust all settings on their detection equipment to determine the suitability of use. The user is responsible to identify specific limitations for the application and to ensure that the suitable processes are used to conform in every aspect to the mentioned FDA regulations.
Although the information and recommendations set forth herein (“information”) are presented in good faith and believed to be correct as of the date hereof, Advanced Cable Ties, Inc. makes no representations or warranties as to the completeness or accuracy thereof.  Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use.  In no event will Advanced Cable Ties, Inc. be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information or the product to which information refers.  Nothing contained herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Advanced Cable Ties, Inc. makes no representation or warranty, expressed or implied, that the use thereof will not infringe upon any patent.  No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information or the product to which information refers.
 The settings on metal detectable machines need to be adjusted and monitored for wet or dry products or environments, ferrous and non ferrous metals, type of food/products, packaging materials, speed and orientation of scanned product.
*Metal Detectable Material complies with the compositional requirements of US FDA regulations for Direct Food Contact; 21 CFR 177.1500 and 21 CFR 184.1375

USA-logo

 

Main InformationDocumentationSolutions

Category:

No Adhesive, Metal Detectable Mounting Bases

Per Case:

1,000, Sold in bag quantities

Color / Material:

Teal Nylon

Adhesive:

None

Screw Size:

#4

Length inch:

0.74

Length mm:

18.79

Width inch:

0.74

Width mm:

18.79

Thickness Inch:

0.19

Thickness mm:

4.82

Slot Width Inch:

0.20

Slot Width mm:

5.08

Slot Height Inch:

0.05

Slot Height mm:

1.27

Mechanical Strength Pounds:

9

Mechanical Strength Newtons:

40

Max. Operating Temp. F:

185

Max. Operating Temp. C:

85

Min. Installation Temp. F:

32

Min. Installation Temp. C:

0

UL Material Flame Rating:

94 HB

RoHS Compliant:

RoHS Compliant

Country of Origin:

USA

Part Number (s)
Quantity
Add to Inquiry
AL-MP-750-NT-MD-22-C 100/Bag Add
pdf

Buy American Act (BAA) & Build American Buy American (BABA) Declaration

Certifications

pdf

FDA & REACH Certificate of Compliance for Metal Detectable

Certifications

pdf

Food Contact Application Declaration

Certifications

pdf

ACT METAL DETECTABLE PRODUCTS

Marketing Literature

pdf

Simply the best in cable ties

Marketing Literature

pdf

Reading ACT Cable Tie Part Numbers

Reference Documents

pdf

ACT Metal Detectable Mounting Pads-No Adhesive

Spec Sheet Drawing

  • Custom Application
  • Food Industry